CARB RESTRICTED ITEMS WILL NOT Ship to restricted addresses.
BMR Suspension
BMR 05-10 S197 Mustang Rear Solid 22mm Sway Bar Kit w/ Bushings & Billet Links - Black Hammertone
$362.30
In Stock
Sold out
CODE: BMRSB023H
Categories: BMR Suspension, Suspension, Sway Bars
ALL PRODUCTS ARE FOR OFF-ROAD USE ONLY
- Description
- CARB RESTRICTED ITEMS
- Shipping and Returns
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB023 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty 22mm bar stock, the SB023 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB023 attaches to your Mustang with billet aluminum end links and 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keep grease in the bushing. The CNC-machined, billet aluminum sway bar end links eliminate deflection. BMR Suspension designed the SB023 sway bar for street performance, autocross, and road race applications. The non-adjustable SB023 gives you a 52% increase in rate over the stock bar (depending on year and model). The rate increases gives you improved handling characteristics so you can drive harder through corners with minimal body roll. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension! BMR Suspensions SB023 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.! NOTE: BMR SB023 rear sway bar is not compatible with convertible models unless the additional OE convertible bracing is removed.
Application Guide
This Part Fits:
Application Guide
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2005-2014 | Ford | Mustang | Base |
| 2012-2013 | Ford | Mustang | Boss 302 |
| 2008-2009 | Ford | Mustang | Bullitt |
| 2005-2014 | Ford | Mustang | GT |
| 2007-2008 | Ford | Mustang | Shelby GT |
| 2007-2014 | Ford | Mustang | Shelby GT500 |
| 2008-2009 | Ford | Mustang | Shelby GT500KR |
Please Note: Competition off-road course only products are not CARB compliant and are for off-road and racing use only. By purchasing from CMBuildz, you understand that these may only be used for off-road and racing use only for unregistered vehicles. Please check with your local, state, and federal laws to see if these products are legal for use in your area. By purchasing any products from CMBuildz, you understand and agree to these terms and accept all liability.
CARB restricted products do NOT ship to addresses that are restricted.
If you are receiving a "Some items in your cart can't be shipped to the provided address" error upon Checkout, then you must remove any CARB restricted items from your cart to complete check out.
All Parts sold are considered Racing Products that are for Competition Off-Road use only.
By purchasing any and all products and completing your cart check out, you are agreeing with CMBUILDZ terms and conditions and understand that some items in your cart might not be able to ship to certain addresses / states due to CARB restrictions and that these products will only be used on Competition Closed Course applications.
CMBUILDZ is not responsible for mis-use of any products nor is responsible for any return/refund costs.
Where do you ship to?
Currently we only ship Domestically in the U.S.A to all U.S. Addresses which include all 50 states and regions. We do not currently ship internationally.
How long do orders take to ship?
We are typically very quick and have a 24-48 hour turnaround time (this applies to products we have readily available at the warehouse and not a product that requires special order). Transit time depends on your order and which warehouse we are shipping from, but typical transit times are between 5-7 business days from one side of the US to the other. Larger items like bumpers and exterior conversions can take up to 10 business days to get you from time of shipment.
What's your domestic shipping policy?
All domestic orders will be shipped to the verified billing address associated with the customer’s credit card. In the event that the products need to be shipped to another address, CMBUILDZ will verify the transaction with the customer by requesting a screenshot of our transaction on the customers online banking portal. Similar to how PayPal verifies orders, CMBUILDZ has implemented an authorization program that will display a unique code on the credit card transaction next to where the “CMBUILDZ” name appears. Other means of verification may also be required depending on the situation. We thank you in advanced for your cooperation.
What's your policy on advertised pricing?
All prices are subject to change without notice. In the event that an incorrect price is listed or advertised, CMBUILDZ reserves the right to refuse or cancel any orders at the incorrect price.
Returns might be subject to a restocking fee
A 20% restocking fee may be applicable on all authorized returns, canceled orders (special or otherwise, shipped or unshipped) in addition to any original shipping fees.
